Olympia Chimney Chimney Cleaning & Sweep Nationwide

Olympia Chimney Chimney Cleaning & Sweep in Jamaica: What to Know First

Olympia Chimney chimney cleaning and sweep in Jamaica typically runs $189 to $329 for most residential jobs, with the work done in a single visit that takes about 90 minutes from setup to final photo report. We are an independent Olympia Chimney service provider, which means we work on their products constantly but can also tell you plainly when a cheaper aftermarket part does the job just as well as OEM. Corrine Halstead and our team have been inspecting and cleaning chimneys across Jamaica since before the row houses near Jamaica Avenue got their first flip renovations, and on a Olympia Chimney system, the cleaning is rarely just about sweeping.

Call (516) 240-9612

If you own a home in Jamaica with a Olympia Chimney liner or chimney system and you have not had it looked at in the last three years, call (516) 240-9612. We will give you a written price before anyone shows up, and a camera scan is part of every visit. Not a flashlight peek. A camera, down the flue, on a screen you can see in real time.

How Olympia Chimney Products Fail - and How We Fix Them

Olympia Chimney makes solid stainless steel liners and chimney components, and they hold up well in most of the housing stock we see in Jamaica. But no product survives forever, and after 15 years of camera scans, we know exactly where their systems show wear first. Here is what we find most often on Olympia Chimney jobs in this neighborhood:

• Class II and Class III creosote buildup in the first flue section above the appliance. Olympia Chimney’s smooth-wall stainless liners, especially the 316L alloy used in their flexible liner kits, move smoke efficiently when they are clean. But Jamaica’s older row houses often run oil-to-gas conversions that leave behind years of old oil residue inside the liner. That residue bakes onto the walls and becomes a sticky, tar-like creosote. We remove it with rotary brushes and, when the camera shows Class III glazing, with a chemical treatment first, then a mechanical sweep. You do not get that off with a hand brush. Anyone who tells you otherwise has not tried.
• Rusted or loosened tee caps at the base of the liner. On Olympia Chimney installations with a tee connection at the appliance, the cap at the bottom of the tee is the first part to corrode. Condensation sits there, especially in Queens winters where flue temperatures swing hard. The cap threads freeze up, and when a tech tries to remove it for cleaning, the whole tee section can shift. We keep aftermarket replacement caps that fit Olympia Chimney tee bodies, and we do not force a corroded cap off and bill you for the break. We show you the photo of the corrosion first.
• Spalling flue tiles behind an Olympia liner. This is the one homeowners do not expect. If an Olympia Chimney stainless liner is retrofitted into an existing masonry chimney in Jamaica, the original clay tiles behind it can be deteriorating without anyone knowing. The liner keeps the heat in and the gases moving, but water from a cracked crown above can get between the liner and the tile wall. Over time, the tiles spall and crumble. That is a repair we scope separately from the sweep, and the camera footage tells us whether it needs attention now or can wait.
• Improperly sealed or missing top plates on Olympia Chimney rigid sections. Rigid Olympia Chimney sections joined with locking bands are good products, but we regularly see top plates on Jamaica roofs where the silicone has failed after a few seasons of sun and snow. The plate lifts, rain gets in, and then the sweep reveals rust streaking down the first 18 inches of the liner. That is not a product defect. It is an installation detail, and most times it was never caulked on all four sides. We reseal it with high-temp silicone after the cleaning, and it is part of the written scope before we start.
• Soot packing at the Olympia chimney cap screen. Olympia’s multi-flue caps and single-flue caps with fine mesh screens are good at keeping birds out, but in Jamaica’s older homes the mesh catches soot and dries it into a hard crust. Once that crust forms, draft drops and the fireplace starts smoking back into the room. We pull the cap, wire-brush the screen, and re-seat it. The cap itself usually has plenty of life left. The screen is the problem.

Our Olympia Chimney Chimney Cleaning & Sweep Process

Here is how a Olympia Chimney job goes when you call Level Two Chimney Jamaica:

1. 1
   You call (516) 240-9612, a person answers. We take down what you are seeing or smelling, the age of the house, and whether you know what kind of Olympia Chimney setup you have. If you do not know, that is fine. The camera will tell us.
2. 2
   We send a written price before the tech arrives. Clause 1 of the Haven Standard says a written price, written scope, and written warranty are delivered before anyone starts. That is not a courtesy. It is how we have operated since 2009.
3. 3
   We protect the work area and run the camera. Drop cloths go down. The tech runs the NFPA 211 Level 2 camera scan before any brush touches the flue. You can watch the screen. Corrine has learned to show homeowners the raw footage first, because the camera does not negotiate, it just shows what’s there.
4. 4
   We sweep and document the creosote class. The brush work varies based on what we saw. Light soot gets a poly brush. Heavy buildup gets a rotary sweep and possibly a chemical pre-treatment. We log the creosote class in the report.
5. 5
   We show you the after-camera scan. The final camera pass proves the liner walls are clean. You get photos, not a verbal summary.
6. 6
   You get the written warranty and photo record before we leave. Clause 4 of the Haven Standard requires a documented photo record on every job. That has been our practice since 2009, which makes us a full decade ahead of the insurance companies that eventually started asking for the same thing.

Before

After

What Olympia Chimney Chimney Cleaning & Sweep Costs in Jamaica

You get the number on the page, because writing it down is the whole point of our company. Here is what we charge in Jamaica:

• Standard sweep with Level 1 camera check: $189 to $249 for a typical single-flue Olympia Chimney setup in good condition.
• Full Level 2 inspection with sweep: $289 to $329 when the flue has heavy buildup, an appliance change in the home’s history, or the home just changed hands and no one knows the last time it was cleaned.
• Cap removal, screen cleaning, and re-seat: Add $60 to $90 when the Olympia cap screen has crusted soot or the top plate needs resealing. We show you the photo before we add the line item.
• Class III creosote chemical treatment: Add $110 to $160 if the camera confirms glazed creosote that brushes alone will not remove.

What moves the price: the height and pitch of the roof around the chimney, how much buildup has accumulated, and whether the cap or top plate needs attention while we are up there. Nothing gets added without a written line item first. Call (516) 240-9612 for a free estimate, and bring us any competitor’s written quote for a free second opinion.

Why Jamaica Homeowners Call Level Two Chimney Jamaica for Olympia Chimney Work

Jamaica has no shortage of chimney companies, and several of them charge extra for a camera scan. We do not. Every Olympia Chimney cleaning and inspection we have done since 2009 is more than 38,000 jobs across the company, and every one of them has a written price before work starts and a photo record when it is done. If we get it wrong, the 365-Day Done Right Promise means we come back and make it right. No argument, no requote. You also get a named technician who shows up in uniform, background-checked, and sends a text when they are on the way. And when your Olympia Chimney system needs a new tee cap, a top plate reseal, or a full liner, we source from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield through the Haven buying network. That network exists to keep customer prices honest, not to pad our margins.

FAQs